哈爾濱工業大學（威海）王蘋副教授

王蘋  副教授


教育經歷

1. 2007年——2012年 哈爾濱工業大學 材料加工工程 工學博士

2. 2005年——2007年 哈爾濱工業大學 材料加工工程 工學碩士

3. 2001年——2005年 蘭州理工大學 冶金工程 學士


工作經歷

2024.04—— 副教授/博導 哈爾濱工業大學（威海），海洋工程學院
2021.01——2024.03 副教授/碩導 哈爾濱工業大學（威海），海洋工程學院
2019.05——2020.12 助理研究員/碩導 哈爾濱工業大學（威海），海洋工程學院
2013.08——2019.05 助理研究員 哈爾濱工業大學 ， 先進焊接與連接國家重點實驗室
2014.06——2019.09 博士后 渤海船舶重工有限責任公司


教授課程

研究生課程：結構疲勞與斷裂（32學時）

研究生課程：鋼結構材性與構造設計(16學時)

本科生課程：輪機自動化（32學時）

本科生課程：船舶工程材料(24學時)

本科生課程：Marine Engineering Systems and Control II（48學時）



招生信息

博士招生：船舶、土木、焊接方向本碩均可報考

碩士招生： 每年招收2-3名左右

本科生招生：不限年級，指導短期/長期科研項目


主要研究方向

1. 焊接結構可靠性與失效分析

2. 復雜焊接結構安全評定

3. 焊接結構疲勞及輕量化設計

4. 焊接過程數值模擬、焊接應力與變形控制

5. 焊接殘余應力調控及測試


科研項目


2020.11-2021.6 MFA2項目焊接疲勞測試試驗進行檢測檢驗服務 主持 -- 進行中

2019.11-2022.12 港珠澳大橋重點研發子課題：基于結構應力法的港珠澳大橋關鍵承載位置疲勞壽命分析 主持 -- 進行中

2020.11-2021.12 軌道車輛焊接結構件概率損傷容限評估方法 主持 --結題

2020.5-2021.4 新型異種材料連接方法、質量定義及缺陷安全技術研究II 主持 ---進行中

2019.10-2020.11 基于結構安全的管道焊縫缺陷修復原則研究 主持--- 結題

2019.3-2020.1 YTB沖壓級燃燒室焊接變形控制、熱處理工藝及高溫輔以性能預測 主持 --- 進行中

2016.01-2019.12 高強鋁合金接頭疲勞全壽命分析，模擬及驗證 主持 --- 已結題

2019.5-2020.4 新型異種材料連接方法、質量定義及缺陷安全技術研究 主持 --已結題

2017.7-2019.12 車體材料本構建模及熱力耦合分析研究 主持 -- 已完成

2017.9-2019.12 基于主S-N曲線的鋁合金攪拌摩擦焊試件疲勞性能研究 主持 --- 已結題

2019.9-2019.12 風電設備結構應力計算方法 負責 --- 已完成

2014.3-2016.12 哈工大科研創新基金-角焊縫失效模式預測及驗證 主持-- 已完成

2013-2014 高強鋼厚板壓力筒的可靠性分析 參與 已完成

2012-2013 KM8真空容器承載分析及焊后應力與變形預測 參與 已完成

2010-2011 某型號CRH車體地板變形控制工藝研究 參與 已完成

2009 XXX高強鋼雙弧焊厚板焊接變形及相變研究 參與 已完成

2009 船用通艙管焊接結構的數值模擬及優化技術 參與 已完成

2008 北京地鐵4#線不銹鋼車體的數值模擬與變形預測 參與 已完成

2008 龍門起重機某側板變形分析 參與 已完成

2008 E6111換熱器管板結構表面堆焊工藝的數值模擬優化 參與 已完成

2007 高速列車鋁合金車A6N01S鋁合金焊接熱裂紋機理研究 參與 已完成

2007 鎳基合金水室隔板拼接焊接變形控制工藝的數值模擬優化 參與 已完成

2007 C2蒸汽發生器下封頭與一次側筒體環縫局部熱處理熱傳導有限元分析 參與 已完成



論文期刊

Banglong Yu, Yong Liu, Ping Wang*, Yongkang Zheng, Xiaoguo Song. Fatigue behavior of SMA490BW welded components considering AHT with traction structural stress. Journal of Constructional Steel Research, 2024.

Banglong Yu, Zhihao Chen, Ping Wang*, Yong Liu. Fatigue and anisotropic behavior of wire-arc additive manufactured TC17 titanium alloy. Journal of Materials Research and Technology, 2024.

Zhihao Chen, Yong Liu*, Hongliang Qian, Ping Wang, Yizhou Liu. Effect of repair welding on the fatigue behavior of AA6082-T6 T-joints in marine structures based on FFS and experiments. Ocean Engineering, 2023.

Peng Zhao, Banglong Yu*, Ping Wang*, Yong Liu. Influence of Repair Welding on the Fatigue Behavior of S355J2 T-Joints. Materials, 2023.


Yizhou Liu, Wenhua Huang, Banhai Yu, Zhihao Chen*, Ping Wang*. Fatigue performance analysis of welded T-joints in orthotropic steel bridge decks with ultrasonic impact treatment. Materials, 2023.

Banglong Yu, Zhihao Chen, Ping Wang*, Xiaoguo Song. A comparative study on the mechanical behavior of S355J2 steel repair-welded joints. Journal of Constructional Steel Research, 2023.

Zhihao Chen, Banglong Yu, Ping Wang*, Hongliang Qian. Fatigue properties evaluation of fillet weld joints in full-scale steel marine structures. Ocean Engineering. 2022, 270, 113651.

Banglong Yu, Ping Wang*, Xiaoguo Song, Shihui Huo.The residual stress relief of post weld heat treatment in SMA490BW welded joints: Simulation and experiment.International Journal of Pressure Vessels and Piping. 2022.

Zhihao Chen, Yanjuan Duan, Ping Wang*,Hongliang Qian. Residual Stress Redistribution Analysis in the Repair Welding of AA6082-T6 Aluminum Alloy Joints: Experiment and Simulation. Materials.2022.

Haibo Yang, Ping Wang*, Hongliang Qian, Pingsha Dong.Modeling of fatigue failure mode in U-rib to deck joints in orthotropic bridge structures. Fatigue&Fracture of Engineering Materials&Structures. 2022.

Haibo Yang, Ping Wang *, Hongliang Qian, Pingsha Dong.Analysis of fatigue test conditions for reproducing weld toe cracking into U-rib wall in orthotropic bridge decks. International Journal of Fatigue.2022.

Yong Liu, Yifei Yu, Ping Wang*, Hongyuan Fang. Analysis and mitigation of the bending deformation in girth-welded slender pipes with numerical modelling and experimental measurement. Journal of Manufacturing Processes.2022.

Zhihao Chen, Banglong Yu, Ping Wang*, Hongliang Qian, Pingsha Dong. Fatigue behaviors of aluminum alloy butt joints with backing plates: Experimental testing and traction stress. International Journal of Fatigue.2022.

Haibo Yang, Hongliang Qian, Ping Wang*, Pingsha Dong. Multiaxial fatigue behaviors of open-rib to crossbeam joints in orthotropic bridge structures. Steel and Composite Structures. 2022.

Haibo Yang, Ping Wang*, Hongliang Qian, Shuang Niu. A Study of Fatigue Crack Propagation Paths at U-Rib Welds in Orthotropic Bridge Decks using a Phased-Array Imaging Technique. Theoretical and Applied Fracture Mechanics. 2022.

Haibo Yang, Ping Wang*, Hongliang Qian, Pingsha Dong. Analysis of fatigue test conditions for reproducing weld toe cracking into U-rib wall in orthotropic bridge decks. International Journal of Fatigue. 2022.

Haibo Yang, Ping Wang*, Hongliang Qian, Shuang Niu, Pingsha Dong. An experimental investigation into fatigue behaviors of single- and double-sided U rib welds in orthotropic bridge decks. International Journal of Fatigue.2022.

Yifei Yu, Xianjun Pei, Ping Wang*, Pingsha Dong. A Structural Stress Approah Accounting for Notch Effects on FatiguePropagation Life: Part I Theory. International Journal of Fatigue.2022.

Haibo Yang,Hongliang Qian*, Ping Wang*.Fatigue property analysis of U rib-to-crossbeam connections under heavy traffic vehicle load considering in-plane shear stress.Steel and composite structures.2021.

Yong Liu, Ping Wang*. Mitigation of residual stress and deformation induced by TIG welding in thin-walled pipes through external constraint.Journal of Materials Research and Technology,2021.

Yong Liu, Ping Wang*. Characteristics of welding distortion and residual stresses in thin-walled pipes by solid-shell hybrid modelling and experimental verification.Journal of Manufacturing Processes.2021.

Song Wei; Ping Wang; Wan Di; Qian Guian; Correia José; Berto Filippo.Fatigue crack growth behavior of Ni-Cr-Mo-V steel welded joints considering strength mismatch effect.International Journal of Fatigue.2021.

Zhihao Chen, Ping Wang*.Thermo-mechanical analysis of the repair welding residual stress of AISI 316L pipeline for ECA.International Journal of Pressure Vessels and Piping.2021.

Haibo Yang, Ping Wang*, Hongliang Qian.Fatigue property of U rib-crossbeam-deck connections in OBD under combined loading of bending and torsion.Theoretical and applied fracture mechanics.2021.

Yifei Yu, Ping Wang*, Xianjun Pei, Pingsha Dong.Fatigue resistance characterization of frictions stir welds between complex aluminum extrusions: An experimental and finite element study.International Journal of Fatigue.2020.

Haibo Yang, Ping Wang*, Hongliang Qian.Fatigue behavior of typical details of orthotropic steel bridges in multiaxial stress states using traction structural stress.International Journal of Fatigue.2020.

Jianxiao Ma, Ping Wang*.Quantitative analysis of overload effect at crack tip on crack growth rate of 7005 aluminum alloy.International Journal of Fatigue.2020.

Ping Wang, Xianjun Pei, Pingsha Dong.Analysis of weld root fatigue cracking in load-carrying high-strength aluminum alloy cruciform joints.International Journal of Fatigue.2020.

Ping Wang, Xianjun Pei, Pingsha Dong, Shaopin Song. Traction structural stress analysis of fatigue behaviors of rib-to-deck joints in orthotropic bridge deck. International Journal of Fatigue. 2019.

王蘋,裴憲軍,錢宏亮.焊接結構抗疲勞設計新方法與應用. 機械工程學報(EI).2021.

王蘋,米莉艷,于誼飛,董平沙.7N01 鋁合金十字接頭抗疲勞設計.焊接學報(EI).2019.

王蘋,裴憲軍,錢宏亮,董平沙.焊接殘余應力對7N01 鋁合金疲勞裂紋擴展影響.焊接學報(EI).2019.

王蘋, 劉永,常荷茜,董平沙.焊接結構學中的熱–力耦合問題簡析.焊接學報(EI).2019.



個人主頁：https://homepage.hit.edu.cn/Nancy