郝亮教授-中國地質大學

郝亮，博士，教授，博士生導師，英國拉夫堡大學博士后。中國地質大學(武漢)珠寶學院副院長，湖北省珠寶工程技術研究中心常務主任，珠寶先進制造中心主任。湖北省專家。

  主要方向：

  先進制造、材料工程、首飾設計、穿戴大健康

  教育背景：

  1991.9-1995.7 ，華中科技大學，工程學，獲學士學位

  1998.9-2000.7 ，華中科技大學，經濟學，獲碩士學位

  2002.9-2005.7 ，新加坡南洋理工大學，工程學，獲博士學位

  學術兼職：

  1.埃克塞特大學，博導、高級講師(2006-2015)

  2.重慶大學，客座教授

  3.湖北省3D打印聯盟教育與應用，副理事長

  4.武漢巧意科技有限公司，董事長、法人代表

  5.英國巧克公司，董事長、創辦人

  科研項目：

  1.合作主持“面向可持續發展的多礦物材料增材制造與數字化設計”，國家自然科學基金中英合作項目，2020年

  2.主持橫向項目《指圈測量設備及3D打印首飾開發》，2019年

  3.主持橫向項目《貴金屬3D打印在高端珠寶首飾定制中的應用研究》，2018年

  4.主持橫向項目《生物基可穿戴3D打印光敏樹脂材料研究》，2017年

  5.主持《噴射增材成形滑坡模型材料與結構雙梯度滑帶層基礎研究》，國家自然科學基金面上項目，2017年

  6.合作主持《增材制造多孔Cu-Ni合金于CVD法制備三維石墨烯基礎研究》，自然科學基金面上項目，2017年

  7.主持《提高高附加值制造業競爭力項目》英國科技發展局，2012年

  8.主持《納米生物復合材料制備和客戶化的快速成型項目》，英國皇家工程協會中英交流協會，2012年

  9.主持《產品和價值共創的規�；瘧�用項目》，英國工程和物力科學研究院，2011年

  10.主持《產品設計和三維打印制造工藝優化技術項目》，英國科技發展局，2009年

  11.主持《激光疊加制造高附加值的航空產品項目》，英國科技發展局，2008年

  12.主持《復雜材料結構的加工和機械性能優化項目》，英國西部研究所和EAD共同出資 ，2008年

  13.主持《先進空狀材料構件和混合物材料的優化技術項目》英國工程和物力科學研究院和Simpleware公司，2007年

  論文專著：

  1. L. Hao, X. Lin, Y.S. Shi (2011) “Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering”, Composites Sci. & Tech., 71,1834-1941

  2. L.Hao, S. Dadbakhsh“Materials and Process Aspects of Selective Laser Melting of Metals and Metal Matrix Composites: A Review” (Invited Paper), Chinese Journal of Lasers, 2009，36(12), 3192-3203.EI

  3. Hao, L. , Mellor, S. , Seaman, O. , Henderson, J. , Sewell, N. and Sloan, M. 'Material characterisation and process development for chocolate additive layer manufacturing', Virtual and Physical Prototyping, 5:2, 57 - 64.

  4. L. Hao, M. M. Savalani, Y. Zhang, K.E. Tanner and R. A. Harris“Rapid, manufacturing of bioceramic/polymer composite implants by selective laser sintering”, International Journal of Computer Application in Technology,2009, 36(1), 97-103

  5. L.Hao, S. Dadbakhsh, O. Seaman, M. Felstead “Selective Laser Melting of a Stainless Steel and Hydroxyapatite Composite for Load-Bearing Implant Development”, Journal of Materials Processing Technology, 2009，209(17), 5793-5801.SCI

  6. L. Hao, M. M. Savalani, Y. Zhang, K.E. Tanner, R.J. Heath and R. A. Harris,“Characterisation of selective laser sintered hydroxyapatite based biocomposite structures for bone replacement”, Proceedings of the Royal Society of London,2007, Series A, 463, 1857-1869

  7. L. Hao and J. Lawrence “Wettability modification and the subsequent manipulation of protein adsorption on a Ti6Al4V alloy by means of CO2 laser surface treatment” Journal of Materials Science: Materials in Medicine, 2007,18 (11),807-817

  8. L. Hao, M. M. Savalani, Y. Zhang, K.E. Tanner and R. A. Harris“The effect of material and processing conditions on characteristics of hydroxyapatite and high density polyethylene bio-composite by selective laser sintering”, Proceedings of the IMechE Part L, Journal of Materials: Design & Application, 2006,220, 125-137

  9. L. Hao, M. M. Savalani, Y. Zhang, K.E. Tanner and R. A. Harris “Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development”, Proceedings of the IMechE Part H, Journal of Engineering in Medicine, 2006,220 (H4),521-531

  10. L. Hao and J. Lawrence“The effects of Nd:YAG laser treatment on the wettability characteristics of a zirconia-based bioceramic”, Optics and Lasers in Engineering,2006, 44 (8),803-814

  11. L. Hao and J. Lawrence“Albumin and fibronectin protein adsorption on CO2 laser modified bio-grade stainless steel”, Proceedings of the IMechE Part H, Journal of Engineering in Medicine, 2006,220 (H1),47-55

  12. L. Hao and J. Lawrence “Melt depth prediction for laser irradiated magnesia partially stabilised zirconia”, Journal of Materials Processing Technology,2006, 180 (1-3),110-116

  13. L. Hao and J. Lawrence “Numerical modelling of the laser surface processing of magnesia partially stabilised zirconia by the means of three-dimensional transient finite element analysis”, Proceedings of the Royal Society of London, 2006,Series A, 462 (2065),43-57

  14. L. Hao and J. Lawrence, “The improved adsorption of human plasma fibronectin on magnesia partially stabilised zirconia (MgO-PSZ) bioceramic resulting from CO2 laser irradiation”, Journal of Laser Applications,2005, 17 (2), 127-133

  15. L. Hao, J. Lawrence, K.S. Chian, “Osteoblast cell adhesion on laser modified zirconia based bioceramic”, Journal of Materials Science: Materials in Medicine,2005,16 (8),719-726

  16. L. Hao, D.R. Ma, J. Lawrence, X. Zhu, “Enhancing osteoblast functions on a magnesia partially stabilised zirconia bioceramic by means of laser irradiation”, Materials Science & Engineering C: Biomimetic and Supramolecular Systems, 2005,25, 496-502

  17. L. Hao, J. Lawrence, Y.F. Phua, K.S. Chian, G.C. Lim, H.Y. Zheng,“Enhanced human Osteoblast cell adhesion and proliferation on 316 LS stainless steel by means of CO2 laser surface treatment”, Journal of Biomedical Materials Research B, Applied Biomaterials, 2005,73B (1),148-156

  18. L. Hao, J. Lawrence and L. Li, “The wettability modification of bio-grade stainless steel in contact with simulated physiological liquids by the means of laser irradiation” Applied Surface Science, 2005,247 (1-4),453-457.

  19. L. Hao, J. Lawrence and L. Li, (2005), “The manipulation of the osteoblast cell response to the Ti-6Al-4V titanium alloy using high power diode laser (HPDL)” Applied Surface Science, 2005,247 (1-4),602-606.

  通訊作者論文：

  1.Tang D, Liang Hao*, Li Y, et al. Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials[J]. Journal of Alloys and Compounds, 2020, 814: 152275.

  2.Tang D, Liang Hao*, et al. Effect of clay functionally graded materials on dual gradient direct ink writing behavior and microstructure of geological model[J]. Rapid Prototyping Journal, 2019.

  3.Feng Z, Li Y, Liang Hao*, et al. Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds[J]. Journal of Nanomaterials, 2019.

  4.Xiong W, Liang Hao*, Li Y, et al. Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy[J]. Materials & Design, 170: 107697, 2019.

  5.Li Y, Feng Z, Liang Hao*, et al. Additive manufacturing high performance graphene-based composites: A review[J]. Composites Part A: Applied Science and Manufacturing, 2019: 105483.

  6.Feng Z, Liu L, Liang Hao*, et al. 3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells[J]. International Journal of Hydrogen Energy, 44(26): 13843-13851, 2019.

  7.Tang D, Liang Hao*, Li Y, et al. Investigation of wax-based barite slurry and deposition for 3D printing landslide model[J]. Composites Part A: Applied Science and Manufacturing, 2018, 108: 99-106.

  8.Yan X, Liang Hao*, et al. Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method[J]. RSC advances, 8(19): 10355-10360, 2018.

  9.Yan X, Liang Hao*, et al Research on influencing factors and its optimization of metal powder injection molding without mold via an innovative 3D printing method, Rsc Advances, 7(87):55232-55239, 2017.

  10.Chunze Yang*, Liang Hao*, Ahmed Hussein,Philippe Young,Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting,Journal of the Mechanical Behavior of Biomedical Materials, Volume 51, Pages 61-73, November 2015.

  11.Chunze Yang, Liang Hao*,Ahmed Hussein,PhilippeYoung,Juntong Huang,Wei Zhu,Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering,Materials Science and Engineering: A, Volume 628, Pages 238-246, 25 March 2015.

  12.Chunze Yan, Liang Hao*,Ahmed Hussein,Simon Lawrence Bubb,Philippe Young,David Raymont, Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering,Journal of Materials Processing Technology, Volume 214, Issue 4, Pages 856-864, April 2014.

  13.Stephen Mellor,Liang Hao*,David Zhang, Additive manufacturing:A framework for implementation,International Journal of Production Economics, Volume 149, Pages 194-201, March 2014.；SCI，T2，IF1.943.

  14.Chunze Yan , Liang Hao *, Ahmed Hussein, Philippe Young, David Raymont,Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting,Materials & Design, Volume 55, Pages 533-541, March 2014.

  15.Ahmed Hussein , Liang Hao*,Chunze Yang, Richard Everson, Materials and Design, volume 52, pages 638-647.；SCI，T2，IF2.27.

  16.Giovanni Strano,Liang Hao*,Richard Everson,Kenneth E. Evans,Surface roughness analysis, modelling and prediction in selective laser melting,Journal of Materials Processing Technology, volume 213, no. 4, pages 589-597. ；SCI，T2，IF1.769.

  17.Ahmed Hussein , Liang Hao* , Chunze Yan, Richard Everson, Philippe Young,Advanced lattice support structures for metal additive manufacturing,Journal of Materials Processing Technology, volume 213, no. 7, pages 1019-1026. ；SCI，T2，IF1.769.

  專著：

  1.L.Hao，F(xiàn)undamentals of 3D Food Printing and Applications(one chapter)：Material, Process and Business Development for 3D Chocolate Printing, Academic Press,2018

  2.L. Hao and R. A. Harris,客戶量身定做的生物植入物開發(Customised Implanted for bone replacement and growth),Springer，17.1萬，2008

  3.L. Hao and J. Lawrence，提高生物材料生物相容性的激光表面處理技術，Wiley，18.9萬，2006

  4.L.W. Zheng, L. Hao, Y.K. Liang, Q.S. Liu and H.L. Liu, Guideline of maintenance of Boiler for Thermal Power Plant (Part 3): valve and steam-water pipes system reparation，China Electric & Power Publication，4300，2001

  授權專利

  1.一種保溫噴射管式三維巧克力打印設備 (專利號：ZL 201420216630.8)

  2.三維打印機打印頭(專利號：ZL 201510777002.6)

  3.一種琺瑯制作方法(專利號：ZL 201610079401X)

  4.一種帶壓感耐高溫漿料的3D打印頭(專利號：ZL 201621121978.4)

  5.一種噴射式3D打印頭和應用該3D打印頭的打印機(專利號：ZL 201621382458.9)

  6.一種實時混料3D打印頭(專利號：ZL 201621336678.8)

  7.一種百葉狀活動結構(專利號：ZL 20172071551.0)

  8.一種可交替變換紋樣的戒指(專利號：ZL 201720690343.4)

  9.一種適用于3D打印成形的可變換圖案的首飾結構(專利號：ZL 201720901505.4)

  10.一種適用于3D打印的鏈式結構(專利號：ZL201720812715.6)

  11.一種適用于3D打印成形的開合活動結構(專利號：ZL201720774093.2)

  12.一種基于巖土模型的材料設計3D打印工藝(專利號：201611117932X)

  13.一種噴射増材成型巖土模型材料及其制備方法(專利號：2019301741368)

  14.錦鯉飾品 (專利號：2019301741368)

  15.一種3D打印機(專利號：CN201520629374.X)

  16.三維打印機打印頭(專利號：CN201520907624.1)

  17.《Choc Draw》計算機軟件著作權

  18.《3D打印控制軟件》計算機軟件著作權

  19.《一種3D打印的控制主板》 集成電路布圖設專有權申請

  其他榮譽:

  1. “杰出科研獎”, 英國�？巳�特大學工程制造、物理和電子學院于2011年12月授予

  2. 最優秀論文獎，2009年國際 International conference on Advanced Research in Virtual and Rapid Prototyping

  3. 最優秀論文獎，2007 for a Paper to Proc. IMechE. H: Engineering in Medicine

  4. 新加坡南洋理工大學博士獎學金，2002年-2005年

  5. 2012年4月6日，英國國家廣播公司(BBC)科技新聞，“Chocolate printer to go on sale after Easter”，http://www.bbc.co.uk/news/technology-17623424

  6. 2011年7月5日，英國國家廣播公司(BBC)科技新聞，”Printer produces personalised 3D chocolate” http://www.bbc.co.uk/news/technology-14030720

  7. 2011年7月，英國郵報技術新聞報道http://www.telegraph.co.uk/techn ... ter-could-be-future

主頁：http://zbxy.cug.edu.cn/ssx/ssx_szll/show-5.html